Yeah there are drivers that should come with the EZManager (they should be in the USB_Drivers folder) although you will need windows 2000 or 32bit XP to run them (maybe server editions of the same line) but people have had luck with virtual machines if you are stuck with a newer OS- http://gbatemp.net/t275407-using-virtua ... flashcarts
Also if it is a newer EZ3 you will also need to set EZMode to the newer version, if it is greyed out then ignore it.
I got a new printer to USB chord because I thought maybe it was the chord that was the issue but it still doesn't work. Also I have EZ Flash 4 now and I really wanna get these working. I'm on a windows xp and the light on the ez flash box won't even turn on.
If the USB cable is good (does it work with another device?) and the light does not turn on chances are you have a dodgy linker (even without drivers or anything else it should have turned on) or far less likely a dodgy LED. Also worth checking it on a USB wall charger- some computers (especially of the XP vintage) do actually follow the USB spec and withhold power until the device is identified.
I have seen the odd dead linker although it is rare but have not seen any pulled apart to see if there are any common faults. I mean I guess you could check the contacts on the USB port but they are pretty solid.
Alas if it is dead there is probably not much you can do, you might well be able to sell the device though.
Users browsing this forum: No registered users and 1 guest
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum